Description
D2 Tool Steel is a high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the steel. D2 provides an effective combination of wear resistance and toughness. D2 holds an edge very well. When needed, use a Diamond Wet Stone or better to re-sharpen the blade at 20-degrees. When done using the knife, wash it is soap and water, dry completely, coat in gun oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade if stored improperly.
HIGH QUALITY 12 7/8″ OVERALL – 7 3/4″ HOLLOW GRIND BLADE
Vacuum Hardened to 57-59HRC – SHARP!
7 3/8″ Cutting Edges
1 1/2″ Blade Width
90-Degree Spine
5 1/8″ Long Rounded Comfort-Grip Handle
3/16″ Thick at the Spine
Steel Rod Pins
Brass Lanyard Hole
90-Degree Spine
Knife Weight: 14 Ounces
KNIFE CARE AND CLEANING:  When needed, use a Diamond Wet Stone or better to re-sharpen the blade. When done using the knife, wash it in soap and water, dry completely, coat in olive oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade and steel bolsters if stored improperly.
Reviews
There are no reviews yet.